Automated Weather Satellite Ground Station (Mostly Made From Trash)

I've just finished a major upgrade to my DIY satellite ground station. This involves a larger (7ft diameter) dish for geostationary GOES-East. I also moved my QFH antenna that receives Polar-Orbiting NOAA and Meteor satellites on VHF frequencies.

This project had some ups and downs, as do most of my builds! I'm using as much second-hand and free equipment as possible to keep costs low. The big dish was a former C-Band television antenna that I found on Craigslist, someone wanted it out of their yard. The L-band feed for GOES is an old coffee can or "cantenna", similar to what you'd use for long-range Wifi. The QFH antenna is one I built from plumbing parts a while ago, in this video:    • Automated Home Weather Station (Satel...  

You can also see some of the other antennas in prior videos, such as my rectangular TV dish:    • Free TV With An Old Satellite Interne...   and my folded-dipole UHF antenna:    • Installing Big Surplus UHF Antenna On...  

Some of the software I'm using for this project includes:
- Goestools (https://github.com/pietern/goestools)
- Satdump (https://www.satdump.org/download/)
- SDR++ (https://www.sdrpp.org/)
- Raspberry-NOAA V2 (https://github.com/jekhokie/raspberry...)
- Vitality-GOES (https://github.com/JVital2013/vitalit...)

I found Carl Reinemann's how-to guide for Goestools very helpful:
- https://usradioguy.com/programming-a-...

NOTES: I used a TV coax cable instead of a USB extension cable described in the above guide. I'm also not using syncthing as described in this guide, and I had to make one other change to the Autostart section. In rc.local I added "sleep 10" (without quotes) just above the two calls to goesrecv and goesproc.

Also thanks to ‪@dereksgc‬ and some of his associates for suggestions along the way!

Some of the hardware that I actually purchased includes:
- RTL-SDR (https://amzn.to/44GnpMY)
- SAWbird+NOAA (https://amzn.to/3wEmGiL)
- SAWbird+GOES (https://amzn.to/4agArSB)
- Raspberry Pi 4 B (https://amzn.to/4akSl6w) (You'll need two if doing both types of receiver!)
- External Bias Tee (https://amzn.to/44Garyy) (optional)
(Buying from these links give me a little cut without charging you more, they're a great way to help out my channel!).



Saveitforparts t-shirts and other merch at https://saveitforparts.myspreadshop.com/

Join this channel to get access to perks:
   / @saveitforparts  

Or support me via Patreon at   / saveitforparts  

Check out gadgets and devices I like at https://www.amazon.com/shop/saveitfor...