How to change Bajaj Chetak Carburator / Vintage scooter Carburator replace / Twostroke Carburator

How to change Bajaj Chetak Carburator / Vintage scooter Carburator replace / Twostroke Carburator /Vintage scooter Carburator Problems
------------------------------------------------------------------
A carburetor or carburettor is a device that mixes air and fuel for internal combustion engines in an appropriate air–fuel ratio for combustion.
------------------------------------------------------------------------
🔰 Follow me on Instagram:
https://www.instagram.com/_r_trone_?r...
------------------------------------------------------------------------
Principle of Carburator

The carburetor works on Bernoulli's principle: the faster air moves, the lower its static pressure, and higher the dynamic pressure is. The throttle (accelerator) linkage does not directly control the flow of liquid fuel. Instead, it actuates carburetor mechanisms that meter the flow of air being carried into the engine. The speed of this flow, and therefore its (static) pressure, determines the amount of fuel drawn into the airstream.
When carburetors are used in aircraft with piston engines, special designs and features are needed to prevent fuel starvation during inverted flight. Later engines used an early form of fuel injection known as a pressure carburetor.
Most production carbureted engines, as opposed to fuel-injected, have a single carburetor and a matching intake manifold that divides and transports the air/fuel mixture to the intake valves, though some engines (like motorcycle engines) use multiple carburetors on split heads. Multiple carburetor engines were also common enhancements for modifying engines in the United States from the 1950s to mid-1960s, as well as during the following decade of high-performance muscle cars, each carburetor feeding different chambers of the engine's intake manifold.
Older engines used updraft carburetors, where the air enters from below the carburetor and exits through the top. This had the advantage of never flooding the engine, as any liquid fuel droplets would fall out of the carburetor instead of into the intake manifold; it also lent itself to use of an oil bath air cleaner, where a pool of oil below an element below the carburetor is drawn up into the mesh and the air is drawn through the oil-covered mesh; this was an effective system in a time when paper air filters did not exist.
Beginning in the late 1930s, downdraft carburetors were the most popular type for automotive use in the United States. In Europe, the sidedraft carburetor replaced downdraft as free space in the engine bay decreased and the use of the SU-type carburetor (and similar units from other manufacturers) increased. Some small propeller-driven aircraft engines still use the updraft carburetor design.
Outboard motor carburetors are typically sidedraft, because they must be stacked one on top of the other in order to feed the cylinders in a vertically oriented cylinder block.
The main disadvantage of basing a carburetor's operation on Bernoulli's Principle is that being a fluid dynamic device, the pressure reduction in a venturi tends to be proportional to the square of the intake airspeed. The fuel jets are much smaller and fuel flow is limited mainly by the fuel's viscosity so that the fuel flow tends to be proportional to the pressure difference. So jets sized for full power tend to starve the engine at lower speed and part throttle. Most commonly this has been corrected by using multiple jets. In SU and other variable jet carburetors, it was corrected by varying the jet size. For cold starting, a different principle was used in multi-jet carburetors. An airflow resisting valve called a choke, similar to the throttle valve, was placed upstream of the main jet to reduce the intake manifold pressure and draw additional fuel out of the jets.

#BajajChetakCarburatorChanging
#HowtochangeBajajScooterCarburator
#CarburatorInstallation
#mechanic
#carburato