Root Samsung Galaxy J2 Prime SM-G532M

VIDEO CON AUDIO askunlock net



Firmware (ROM): askunlock net




Root con la versión May 1, 2017 del ROM askunlock net

Trabajo en proceso



Written Instructions below / Instrucciones escritas abajo

Descargas necesarias:
1. Stock ROM askunlock net
1.1. Busca con Google la versión de SM-G532M con fecha Septiembre 2016 que es la compatible con este root. Hay varios sitios que tienen las rom disponibles para descargar.
2. Odin askunlock net
3. Programa para Root askunlock net (Cortesía Cellular Service Uruguay)
------------------
THIS TUTORIAL IS FOR SAMSUNG GALAXY J2 PRIME SM-G532M. If you have a different model, the procedure could be the same, the files? That's another story. I'm sure you will figure it out.

Frist, you need to take back your phone to the stock rom version September 1, 2016

1. Download all the programs listed below
Odin askunlock net
Stock rom (choose your model) askunlock net
AiO Root Patcher askunlock net (Cortesía Cellular Service Uruguay)

2. Put your phone in Download Mode (Power+Volume Down+Home) do not plug it to USB yet

3. Unpack the AiO, run your language, read the instructions above, install the drivers. If your drivers are already installed, you can type “no”. Leave the program open. You can close it if you want, but you will need it later. This was just to install the drivers.

Now plug your phone. Make sure your phone is recognized by the OS, you will notice it when run Odin.

4. Run Odin and fill it with the respective files. Pay attention to the written instructions and order of the files. Press Start. It will take a few minutes and the phone will restart by itself.

When Android Warning appears, leave it there.. It will show you the Recovery Mode options few seconds later. Don't panic.

The common problem

5. Here comes the Password, well, do a Factory Reset by pressing Power+Volume Up+Home. If you have a problem entering to the Recovery Mode, repeat the flash with Odin or you choose the wrong Stock Firmware (Stock Rom), try once again. - this is the idea-

6. When you access to the phone interface, follow the Setup Wizard. Once done, go to Setting, and active the Developer Options. Here you need to active Oem Unlock and Debugging. Accept your computer access...

The root process

7. Open the AiO Root Patcher, skip the drivers, press any key… and wait to your phone goes to Download Mode again. This time it will open Odin automatically with one field AP. Browse to the stock-root file and apply it with the Start button.

Perhaps you will need to do another Factory Reset (no.5) Keep the AiO Root Patcher open.

8. Your phone will boot normally, go back to the AiO Root Patcher and complete the process.

Tips: Use the Internet connection when needed to avoid the useless apps update.

9. Now all you need to do is update de SuperSU app. Open, choose Expert, Continue and Normal… wait for reboot. If it doesn’t reboot by itself, you can restart your phone.

10. Install Apps2SD or any other. If you uninstall a system app, you will need to flash with Odin again, so you better walk before run. Sometimes apps doesn't move to the SD, you need to do it manually.