How to Replace Front Wheel Hub and Knuckle Assembly 2006-12 Ford Fusion

Buy Now!
New Steering Knuckle Assembly from 1AAuto.com https://trq.video/ia-1AAXX00277

Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to install a new wheel hub and bearing on your 2006-2012 Ford Fusion.

• Check here for more videos on the 2006-2012 Ford Fusion:    • Ford Fusion 2006-2012 1st Generation  

This repair was done on a 2011 Ford Fusion SEL 3.0L Sedan 4-Door AWD and the process should be similar on the following vehicles:
2006 Ford Fusion
2007 Ford Fusion
2008 Ford Fusion
2009 Ford Fusion
2010 Ford Fusion
2011 Ford Fusion
2012 Ford Fusion

Tools you will need:
• 10mm Socket https://trq.video/oacv-1AXAA00017
• 32mm Socket https://trq.video/oa2-1AAST00003
• Side Cutters
• Torque Wrench https://trq.video/oTk-1AXAA00044
• Hammer

Subscribe:    / @trq  

Check out our playlist:
Ford Fusion 2006-2012 1st Generation:    • Ford Fusion 2006-2012 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.