DIY E-bike Battery || Assembling 48V Hailong E-bike Battery || E-bike Conversion #1

Hello, fellow makers!
In this tutorial i will show you how i assembled my Hailong 48V battery kit.

For more insights and details check out this Instructable : https://www.instructables.com/id/DIY-...

Support me on Ko-fi: https://ko-fi.com/hypermakes2620

Things required:
Hailong 48V Battery case :https://aliexpress.com/item/328911330...
18650 Li-ion cells EV grade 3C discharge rate : Local supplier
54.6V 4A Charger : https://aliexpress.com/item/327420093...
Spot Welder : https://aliexpress.com/item/100500186...
BMS(13S 60A) : https://aliexpress.com/item/400087518...
Silicone Wires : https://aliexpress.com/item/100500270...
Insulation Gasket : https://aliexpress.com/item/100500169...

Tools required:
Soldering Iron
Solder wire
Solder flux
Hot glue gun
Wire stripper
Kapton Tape


Note*- Step numbering is wrong in video. Use time stamps if you are lost.

Steps
0:00 Intro
0:16 Materials Required
0:55 Checking Cells
1:56 Arranging Cells
3:28 Arranging Nickel Sheets
3:51 Spot Welding Cells
4:44 Adding BMS
5:43 Masking Battery
6:42 Checking the fit of new BMS
7:47 Wiring All Components
9:05 Putting the battery together

Follow me on Instagram:   / hyper_makes