FIRST JET ? 😳 • 2nd Flight Freewing Me-262 twin 70mm HP RC PLANE • (English/Français 4K 60fps HDR)

This Freewing Messerschmitt Me-262 "7 Yellow" V2 Twin 70mm EDF Jet High Performance could be a first jet if you know how to land a tricycle plane, just follow my rates and it'll be okay 🤠

Get yours here ➡️ https://www.turbines-rc.com/fr/jets-e...


🇺🇸 Hi folks 👋🏻🤠

Thank you for watching this video and don't forget to subscribe so you don't miss anything (it's free but it helps content creators a lot) 🙏🏻🥰

If you want to help me to expand my squadron 😜 or buy a specific plane to review, you can help me by making a small donation via my PayPal link https://www.paypal.me/arthurjanin?loc...

Thank you very much in advance my friends 🤩🙏🏻





🇫🇷 Salut les copains 👋🏻🤠

Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer (c’est gratuit et pourtant ça aide énormément les créateurs de contenus) 🙏🏻🥰

Si vous voulez m’aider à agrandir mon escadron 😜 ou que j’achète un avion en particulier, vous pouvez m’aider en faisant un petit don via mon lien PayPal https://www.paypal.me/arthurjanin?loc...

Merci beaucoup beaucoup d’avance les amis 🤩🙏🏻




📸 Follow me on Instagram :   / arthuraerorc  
⏰ TikTok : https://vm.tiktok.com/ZMNYCqUhC/


You can buy my things here ⬇️

🎮 Jeti Rx and DS16 ➡️ https://www.opale-paramodels.com/fr/ ‪@OpaleParamodels‬
🔋CNHL LiPo ➡️ https://chinahobbyline.com
✈️ Jets and more ➡️ https://www.turbines-rc.com/fr/?aff=4




🛩🇩🇪 Freewing Messerschmitt Me-262 "7 Yellow" V2 Twin 70mm EDF Jet High Performance

https://www.turbines-rc.com/fr/jets-e...

Specifications :
Wingspan 1500mm, length 1280mm, weight without LiPo 2570gr!
⚖️ with HRB 4000 60C 3155gr / CNHL 4000 70C 3240g / with HRB 5000 50C 3315gr / with CNHL 5000 70C 3400g

2952-2100Kv brushless inrunner motors
EDF métal 12 blades with ESC 60A hobbyWing, Internal SBEC, EC5 connector

Speed : 165kmh

❌ Book’s CG 100-110mm but maiden at 113mm and it’s nose heavy but 118mm is way better (can’t put LiPo any further aft…)

CG 118mm :
CNHL 4000 70C (690gr) (all the way back)
HRB 5000 50C (745gr) (all the way back)
HRB 4000 60C (585gr) (see photo)

CG 113mm (nose heavy):
CNHL 5000 70C (830gr) (all the way back)



📏 My rates (high/mid/low) :
- Aileron 22/15/15mm
- Elevator ‪18/15/10‬mm
- Rudder 28/20/15mm
- Flaps (outer flap) 20/30mm with up 10% (1.5mm) elevator compensation


⏰ Flights with timers and voltage (checked few minutes after landing on cell meter):
-1st (filmed), CG113mm: CNHL 6S 5000 70C : 4m22 flight (3m26 motor) 3.87v
-2nd (filmed), CG118mm: CNHL 6S 4000 70C : 3m51 flight (2m53 motor) 3.83v
-3rd, CG118mm: HRB 6S 5000 50C : 3m42 flight (2m53 motor) 3.85v




0:00 Presentation (CG 118mm LiPo placement CNHL 6S 4000 690gr)
2:30 Take-off !
2:47 CG TESTS (almost neutral)
3:28 Flying
4:17 Touch'n'go Full flaps crosswind
4:43 Touch'n'go NO flaps (wheelie)
5:07 Loop
5:33 Dedication passes
6:07 LANDING
6:40 3m51 flight (2m53 motor) : 3.83v after few minutes of cooling
7:10 Post flight discussion
7:45 THANKS for SUBSCRIBING 🥰🙏🏻
8:06 Photos + LiPo placements


#jet #rcplane #freewing #rcjet #jeti #opale #radiocontrol #setup #trainer #modellbau #me262 #eflite #new #warbird #perfect #foam #crash