How to Replace Rear Upper Control Arm Bushings 1999-2004 Jeep Grand Cherokee

Buy Now!
New Control Arm Bushing from 1AAuto.com http://1aau.to/ia/1ASMX00171

This video shows you how to install new rear upper control arm bushings from TRQ on your 1999-2004 Jeep Grand Cherokee.

This process should be similar on the following vehicles:
1999 Jeep Grand Cherokee
2000 Jeep Grand Cherokee
2001 Jeep Grand Cherokee
2002 Jeep Grand Cherokee
2003 Jeep Grand Cherokee
2004 Jeep Grand Cherokee

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obvY/1AXAA00013
• Pry Bar http://1aau.to/o2i/1AXAA00020
• 21mm wrench
• 10mm Socket http://1aau.to/obqw/1AXAA00017
• 13mm Socket http://1aau.to/obLQ/1AXAA00015
• 15mm Socket http://1aau.to/obLQ/1AXAA00015
• 21mm Socket http://1aau.to/oasE/1AXAA00043
• Press
• Air Chisel http://1aau.to/ob8/1AXAA00270
• 15/16 Inch Socket
• Ratchet http://1aau.to/obQq/1AXAA00016
• Socket Extensions http://1aau.to/obLQ/1AXAA00015
• Torque Wrench http://1aau.to/oaT8/1AXAA00044
• Copper Anti-Seize
• Gloves http://1aau.to/oay9/1AXSS00048
• Liquid Thread Locker
• Rust Penetrant
• Safety Glasses
• Sandpaper
• Floor Jack http://1aau.to/oahX/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/o6k/1AXAA00065
• Pole Jack
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.