Скачать или смотреть How to Replace Rear Wheel Bearings 2002-2006 Honda CR-V

Shop TRQ on 1AAuto.com
Wheel Bearing https://trq.video/ia-1AAXX00058
Wheel Bearing Set https://trq.video/ia-1ASHS00506
Shop TRQ on Amazon
Wheel Bearing https://www.amazon.com/dp/B0748Y98S4
Wheel Bearing Set https://www.amazon.com/dp/B0741WJD7M

This video shows you how to install new rear wheel bearing & hub assemblies from TRQ on your 2002-2006 Honda CR-V. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.

Estimated installation time for a professional technician is approximately: 3 hours 54 minutes

This repair was done on a 2006 Honda CR-V LX 2.4L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2002 Honda CR-V
2003 Honda CR-V
2004 Honda CR-V
2005 Honda CR-V
2006 Honda CR-V

Tools you will need:
• Flat Blade Screwdriver
• Impact Screwdriver
• Pry Bar https://trq.video/oasW-1AXAA00020
• 10mm Wrench
• 10mm Socket
• 12mm Socket
• 14mm Socket
• 17mm Socket
• 19mm Socket
• 22mm Socket
• 32mm Socket https://trq.video/ofU-1AAST00003
• Brake Caliper Hanger https://trq.video/orq-1AXAA00439
• Press
• Locking Pliers
• Needle nose pliers
• Needle nose pliers
• Side Cutters
• Snap Ring Pliers
• Air Chisel
• Ratchet
• Socket Extensions
• Torque Wrench https://trq.video/obVy-1AXAA00044
• Block of Wood
• Copper Anti-Seize
• Gloves https://trq.video/ocrr-1AXSS00048
• Marker / Writing Utensil
• Rust Penetrant
• Safety Glasses
• Silicone Paste
• Floor Jack
• Hammer
• Jack Stands
• Pole Jack
• Punch
• Rubber Mallet
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Honda CR-V 2002-2006 2nd Generation:    • Honda CR-V 2002-2006 2nd Generation  

📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.