STEERING COLUMN REASSEMBLY PART 2

Описание к видео STEERING COLUMN REASSEMBLY PART 2

Here is the reassembly of the rest of the tilt steering column. My parts showed up on Sunday afternoon so decided to get this column completed. I did make some minor mistakes, primarily with the installation of the upper column bearings but ultimately it worked out. I think the compression of the lock plate helped make sure the lower bearing race was completely seated. I tried to be as thorough as I could. In hindsight I should of had someone holding the camera for me so I could have filmed where I needed 2 hands, which was most of it. Hope this helps others out there. Any comments or suggestions are appreciated.

Parts used
https://prosteeringcolumn.com/1976-up...
https://www.wolffeng.com/store/p2/M10...
Crown Automotive 83510055 Steering Column Bearing Kit
Crown Automotive 2925062 Turn Signal Cancelling Cam Retaining Ring
Crown Automotive 4487816 Turn Signal Cancelling Cam
Crown Automotive 8120081K Coded Ignition Cylinder with Keys
Crown Automotive J3250575 Ignition Switch
Crown Automotive 56002011 Turn Signal Switch

Комментарии

Информация по комментариям в разработке