Скачать или смотреть Flash Jio Lyf F81E, Flashing Trick of Jio Keypad mobiles

lyf f81e how to flash, how to flash jio phone, jio lyf f81e flash file, jio lyf f81e hang on logo, jio phone hang, jio phone password lock, jio phone hard reset, jio keypad phone flashing, jio flash, lyf-f81e flashing, jio keypad phone, lyf phone flashing, jio keypad software, jio phone software, jio phone unlock, jio phone flashing boot key, jio phone flashing f61f, jio phone flashing f81e, jio phone flashing error, how to flash jio phone f81e

Downloading Link:- https://gg-l.xyz/A333D2

Read our Blogs:- http://bit.ly/2GbpGa9

Download Other Flash Files:- http://bit.ly/2GbpGa9

Join Us on Facebook:-   / ekbaatt  



Hi Friends,

How Are You..?

There is some issues with my Costumers and Students that they have LYF F81E Mobile phone. but it is hanged on LOGO, some friends are saying that their phone working very Slowly, and Consuming Battery, what to do...?


Don't Worry, Here is Solution...

If you want to repair this phone with this fault you have to flash your phone with tested firmware file. after flashing your phone will work properly.


Before flashing be sure that your phone's Battery is fully Charged or may be 50% to 70% is necessary charged battery, down battery may be caused of damage your phone.

Another thing you have to look before flashing, your important Data as Pics, Audios, Videos, Contact Numbers etc. all data will be deleted after flashing then keep it at safe place, if you think that your Data is very important,

Copy your files or data to SD Cards, Pen Drive, Computer or transfer to another phone.

For Flashing Some Requirements are:

High Quality USB Cable (Low Quality Cable can Create Problems)

Drivers in PC.

Flash File (Link is given Below)

Laptop or Computer.

Now You are Ready to Rock

Download and Extract Firmware File

Download and install SPD Drivers.

Open Extracted Firmware File.

Open Flash Tool.

After Complete above's Step, switch off your mobile, wait 5 to 10 Seconds. Connect Phone to Pc, with pressing 3no. Button of Keboard.

Click on Configure Button and take file and Click on Start Button.

Flashing will start and it will be take about 15 minutes.

Flashing Done.

How to Flash Video Tutorial:-



Downloading Links:-

SPD drivers