Скачать или смотреть How to Replace Steering Shaft 2005-2010 Chevrolet Cobalt

Buy Now!
New Intermediate Steering Shaft with Coupler from 1AAuto.com https://trq.video/ia-1ASTC00140

This video shows you how to install a new steering shaft on your 2005-2010 Chevrolet Cobalt. Depending on the type of vehicle, the shaft connecting your steering wheel to the steering mechanism may be exposed, and prone to wear or corrosion. If there is play in the steering, or a chance of breakage, it’s best to replace it!

This repair was done on a 2007 Chevrolet Cobalt LT 2.2L Coupe 2-Door FWD and the process should be similar on the following vehicles:
2005 Chevrolet Cobalt
2006 Chevrolet Cobalt
2007 Chevrolet Cobalt
2008 Chevrolet Cobalt
2009 Chevrolet Cobalt
2010 Chevrolet Cobalt

Tools you will need:
• Pry Bar https://trq.video/ovk-1AXAA00020
• 13mm Socket https://trq.video/oaj5-1AXAA00015
• 19mm Socket
• 3/8 Inch Impact Gun
• Ratchet https://trq.video/oate-1AXAA00016
• Torque Wrench https://trq.video/oR9-1AXAA00044
• Bungee Cord
• Dielectric Grease
• Liquid Thread Locker
• Hammer
• Pick https://trq.video/osj-1AXAA00037

Subscribe:    / @trq  

Check out our playlist:
Chevy Cobalt 2005-2010 1st Generation:    • Chevy Cobalt 2005-2010 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.