Скачать или смотреть ProDig - Folding Grass Fork

Folding Grass Forks
• Designed for use by agri contractors on large artic loaders.
• Heavy duty construction using structural hollow sections and plates.
• Available in 3.675m (12ft), 3.986m (13ft), 4.235m (14ft) and 4.88m (16ft)
• 40mm Hardox steel by 1.525m (5ft) tines used in bottom bar for long service life.
• 60mm pivot point pin fitted with replaceable phosphor bronzes bushings.
• Hardened cutting edge full length of bottom section. • Fitted with Hydraulic accumulator and buffer pads as standard.
• Side wings can be locked in closed position for transport.
• Double acting hydraulic ram on each wing. • Bushings and grease points on all pivot points.

Our range of folding grass forks can be fitted with additional extras.

Light kit - This consists of front facing amber strobe lights and rear facing tail lights. These highlight the outer extents of the fork when folded up for safety while being transported on the road.

Adjustable top spill frame – If working where height is limited (ie. in a shed). This allows the user to either fold the spill frame down 90 degrees or remove the top frame completely.

Company branding- Company logo or name can be cut into the backing plate of the fork with matching colours.

Extra side tines- our forks can be fitted with a two side tines, either welded HARDOX tines or removable round tines.

Extra hydraulic service- Our fork can be fitted with an additional hydraulic service allowing each wing to be folded up independently.

As standard- all our forks come fitted with a hydraulic accumulator, buffer pads, Hardened cutting edge full length of bottom section, replaceable phosphor bronzes bushings on main hinge point and reflective strips on outer wing.