INSTALLATION OF THE TACO MOTO CO TIDY TAIL ON THE 20+ HUSQVARNA FEs

Installation steps for the Taco Moto Co. Tidy Tail light unit and accessories for the 20+ Husqvarna FEs bikes.

Tools needed: 8mm socket, 6mm socket, T-20 Torx bit, Phillips screw driver, small pliers, small pocket screwdriver, and about 25 minutes.

*A note on the brake light pulsar, when the brake light switch activates the pulsar flashes the light fast, then slow, then the glows constant until the brakes are released. A re application of the brakes will trigger the same fast then slow then constant light sequence.

If you want to buy this or any of our other lighting components or accessories find them on our website.

https://tacomoto.co/products/tidy-tai...

https://tacomoto.co/collections/elect...

if you need any parts, want us to build you a bike, have any questions, or need help with anything on your machine don't hesitate to call or email us.
702-812-6626
[email protected]
https://tacomoto.co/

also join us on the best ktm / husq tech support group on facebook:
https://www.facebook.com/groups/EXCFE...