How To Make A Dark Sensor On A Breadboard [HD]

Описание к видео How To Make A Dark Sensor On A Breadboard [HD]

A 'Dark Sensor' is a device which senses the presence of darkness. It senses the presence of darkness with the help of the LDR. Whenever light is focused on the LDR...the L.E.D will not glow. As soon as you cover the LDR or keep the dark sensor in a dark room without lights...the L.E.D will glow.

It can also be called an "Automatic Street Light" Circuit since the L.E.D will come "on" after sunset i.e when it becomes dark and the L.E.D will turn "off" during sunrise because there's light! 💡

Electronic Components Required:- LDR (Light Dependant Resistor), L.E.D (Light Emitting Diode), 100k ohm resistor, 9v battery with battery clip, BC547 Transistor, Breadboard and some wires.

First connect all the elements on the breadboard to check if it works and then you can solder it to make it permanent. You can even attach a switch to the "Dark Sensor" to turn it "ON" and "OFF" when required.

Steps of construction:-
1.Connect the LDR to the 'base' and 'emitter' of the BC547 transistor.

2.Then connect one end of the 100k ohm resistor from the 'base' of the BC547 transistor and the other end of the 100k ohm resistor to anode (+) side of the L.E.D.

3.The cathode (-) side of the L.E.D will get connected to the 'collector' of the BC547 transistor.

4.The positive (+) side of the battery will get connected to the 100k ohm resistor and anode (+) of the L.E.D while the negative (-) side of the battery will get connected to the 'emitter' of the BC547 transistor and the other end of the LDR.

IF YOU DONT UNDERSTAND THIS; MAKE SURE YOU WATCH MY PREVIOUS "DARK SENSOR" VIDEO'S

LINK :---    • How To Make A "Dark Sensor."  

LINK 2 :---    • How to make a "Dark Sensor" on Breadb...  

LINK 3 :---    • How to make "Automatic Street Light/D...  

How to make a "Light Sensor" on Breadboard :-    • How to make a "Light Sensor" on Bread...  

How to make a "Dark Sensor" on Breadboard :-    • How to make "Automatic Street Light/D...  

How to make a "Water Level Indicator" on Breadboard :-    • ✔How to make a "Water Level Indicator...  

How to make an "Infrared Circuit" on Breadboard :-    • How to make an "INFRARED CIRCUIT" on ...  

How to Adjust the Brightness of a L.E.D :-    • ✔How to Adjust the Brightness of L.E....  

How to Adjust the Volume of a Buzzer :-    • ✔How to Adjust the Volume of Buzzer o...  

How to Adjust the Speed of a Fan(DC Motor) :-    • ✔How to Adjust the Volume of Buzzer o...  

How to make a "Reed Switch Circuit" on Breadboard :-    • How to make a "Reed Switch Circuit" [...  

How to make an "Electronic Dice" on Breadboard :-    • How to make a "Electronic Dice" on Br...  

How to make a "Touch Sensor" using 555 Timer IC on Breadboard :-    • How to make a "Touch Sensor" using 55...  

How to make a "Remote Tester Circuit" on Breadboard :-    • How to make a "Remote Tester Circuit"...  

Touch 'on'/Touch 'off' L.E.D on Breadboard :-    • ✔Touch 'ON'/Touch 'OFF' L.E.D💡on Brea...  

How to make a Simple Dark Sensor? :-    • How To Make A "Dark Sensor."  

How to make an "Electronic Wire Loop Game" on a Breadboard :-    • How to make a "Electric Wire Loop Gam...  

I have explained the circuit construction on the breadboard. Once you get the circuit right you can solder it to make it permanent. Your "Dark Sensor" is ready. Any queries then please do ask!
Thanks for watching. Don't forget to like/subscribe/comment/share. 😊✌

Комментарии

Информация по комментариям в разработке