How to Replace Crankshaft Position Sensor 1995-2004 Toyota Tacoma 2.4L L4

Buy Now!
New Crankshaft Position Sensor from 1AAuto.com https://trq.video/ia-DEECS00023

This video shows you how to install a new crankshaft position sensor from TRQ on your 1995-2004 Toyota Tacoma (2.4L L4). The crankshaft position sensor is an important component of any electronically controlled ignition system. The sensor provides the computer with data about the position of the crank shaft to properly adjust ignition timing. If the sensor in your vehicle is broken or malfunctioning, you may suffer poor performance, or get a check engine light.

Estimated installation time for a professional technician is approximately: 1 hour 0 minutes

This repair was done on a 2001 Toyota Tacoma Base 2.4L Extended Cab Pickup 2-Door RWD Automatic and the process should be similar on the following vehicles:
1995 Toyota Tacoma
1996 Toyota Tacoma
1997 Toyota Tacoma
1998 Toyota Tacoma
1999 Toyota Tacoma
2000 Toyota Tacoma
2001 Toyota Tacoma
2002 Toyota Tacoma
2003 Toyota Tacoma
2004 Toyota Tacoma

Tools you will need:
• Pry Bar https://trq.video/oaco-1AXAA00020
• 10mm Wrench https://trq.video/oahN-1AXAA00010
• 14mm Wrench https://trq.video/oahN-1AXAA00010
• 10mm Socket https://trq.video/obQs-1AXAA00017
• 12mm Socket https://trq.video/ochC-1AXAA00015
• 14mm Socket https://trq.video/ochC-1AXAA00015
• Pliers
• Ratchet https://trq.video/ochY-1AXAA00016
• Cloth Rags https://trq.video/oSx-1AXSS00035
• Gloves https://trq.video/obnI-1AXSS00048
• Safety Glasses
• Floor Jack https://trq.video/oaEK-1AXAA00068
• Jack Stands https://trq.video/oard-1AXAA00065
• Rubber Mallet
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Toyota Tacoma 1995-2004:    • Toyota Tacoma 1995-2004  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.