Скачать или смотреть XG Elastic Silicone for Ribbon printing,taps printing Silicone ,Anti slip silicone ,Glossy silic

TDS of XG silicone print on elastic ribbon
Preparation
1.Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee.
2.Pigments added ratio:For white and fluorescent color 20%,other color 10%
3.Catalyst mixing ratio:10% slow dry XG-MB-1 Mid dry XG-ZB-1
4.Silicone thinner XG-128A adding ratio:0-20%
5.Heating Temp and time: cure temp :80℃,100℃,120℃ or dry by room temp.
Silicone paste printing tips
1.Elastic silicone paste clear printing for 2-6 times
Elastic Silicone XG-130A 50G 50%
Elastic Silicone XG-130B 50G 50%
Silicone thinner XG-128AH 10G 10% Cure by 80℃,100℃,120℃ or dry by room temp If need fast dry then can mix with catalyst XG-866B-2 1-2%
2.Color effect silicone printing for 3-4 times
Elastic Silicone XG-130A 50G 50%
Elastic Silicone XG-130B 50G 50%
Silicone pigments XG-501 10G 10%
Silicone thinner XG-128AH 10G 10% Cure by 80℃,100℃,120℃ or dry by room temp If need fast dry then can mix with catalyst XG-866B-2 1-2%.
3.Glossy silicone paste for top coating
Glossy top coating for 2 times wet on wet printing
Glossy silicone paste XG-399-2 100G
Slow dry catalyst XG-MB-1 10G 2%
Silicone thinner XG-128AH 0-10G 0-10% Have to get silicone bubbles out first ,try to use cold wind to support and it will be better to use low temp by longer heating time to avoid bubbles problem. Cure by 80℃,100℃,120℃ or dry by room temp After printing finish, to heat by 100℃- 120℃ for about 2 minutes or room temp for over 24 hours.
For more silicone paste information contact with: E-mail:[email protected] ; Cell/whatsapp/wechat:+86-13825409489; Web: www.xgsillicone.com; Mr Kingjoe Liu