How to Replace Lower Ball Joints 2011-2014 Hyundai Sonata

Описание к видео How to Replace Lower Ball Joints 2011-2014 Hyundai Sonata

Buy Now!
New Ball Joint from 1AAuto.com http://1aau.to/ib/1ASBJ00349

This video shows you how to install new lower ball joints from TRQ on your 2011-2014 Hyundai Sonata. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.

This repair was done on a 2013 Hyundai Sonata GLS 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2011 Hyundai Sonata
2012 Hyundai Sonata
2013 Hyundai Sonata
2014 Hyundai Sonata

Tools you will need:
• Pry Bar http://1aau.to/o4v/1AXAA00020
• 15mm Wrench http://1aau.to/o74/1AXAA00010
• 17mm Wrench http://1aau.to/o74/1AXAA00010
• 18mm Wrench
• 15mm Socket http://1aau.to/obTP/1AXAA00015
• 18mm Socket http://1aau.to/oawX/1AXAA00043
• 21mm Deep Socket http://1aau.to/oawX/1AXAA00043
• 1/2 Inch Ratchet http://1aau.to/oawX/1AXAA00043
• 1/4 Inch Ratchet http://1aau.to/obw4/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/obTP/1AXAA00015
• Torque Wrench http://1aau.to/oaZw/1AXAA00044
• Gloves http://1aau.to/oaJT/1AXSS00048
• Safety Glasses
• Floor Jack http://1aau.to/oaoI/1AXAA00068
• Small Hook
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Комментарии

Информация по комментариям в разработке