Скачать или смотреть LGX FF for Prusa MK3S 01 Preparing The LGX

This is a Bondtech Video Guide focused on preparing the LGX to be installed as a part of the LGX FF For Prusa MK3S Upgrade Kit.

********* IMPORTANT *********
Use the following guide to assist you strip the Prusa 3S and get the parts you will need to install this upgrade:
https://support.bondtech.se/Guide/02....
********* IMPORTANT *********

You can find the Bondtech For Flexibles For Prusa MK3S here:
https://www.bondtech.se/en/product/bo...

You can find the LGX eXtruder here:
https://www.bondtech.se/en/product/lg...

You can find the LGX For Flexibles Set here:
https://www.bondtech.se/en/product/bo...

You can find the LGX™ Accessories for FF Prusa MK3S here:
https://www.bondtech.se/en/product/lg...

Technical Specification
LGX™ EXTRUDER
e-steps value : 400 on 16 bit micro-stepping setups; 800 on 32 bit micro-stepping setups.
Drive wheels : hardened steel;
Materials compatibility : abrasive; rigid; semi-flexible; flexible; and soft.
Mounting holes : M3
Mounting patterns : bottom anterior (2 points); left (2 points), right (2 points), front (4 points), back (4 points)
Holes on the sides of the LGX™ : 5 mm depth
Holes on the bottom of the LGX™ : 12 mm depth
retraction speed : 35 mm/s
retraction distance (direct drive) for rigid materials : 0.4 mm
retraction distance (direct drive) for soft materials : 3 mm
Max operating temperature : 80°C
LGX™ FF net weight : 269.6 g
Package measurements : 80x103x73 mm
Package weight : 269 g
Download the LGX Technical Drawings here:
https://www.bondtech.se/wp-content/up....


CREDITS
Soundtrack is based on 2 Bensound cinematic tunes:
Adventure;
Memories.

Check Bensound at https://www.bensound.com/