Veev Pods Refilling

Chapters:
00:00 Remove the cover and connector
00:20 Remove the coil
00:30 Remove the gasket
00:40 Refill
00:44 Put the coil back into the gasket
00:54 Put the gasket back into the pod
01:04 Put the connector and cover back into the pod
01:11 Disclaimer


Step 1:
Remove the cover and connector using the small hole. If it’s too difficult the first time, hold the pod with a paper towel and use a flathead screwdriver.
Step 2:
Use pliers to grab and remove the coil.
Step 3:
Grab and remove the gasket.
Step 4:
Refill with liquid! (With nicotine salt, NOT freebase nicotine)
Step 5:
Put the coil back into the gasket.
Step 6:
Put the gasket back into the pod.
Step 7:
Put the connector and cover back into the pod.
Disclaimer:
If the LED turns red and it doesn’t work, the connector isn’t touching the coil properly. Take it apart and reassemble correctly. You’ll get it right the first time next time.
After 3-4 refills, the coil will burn out and won’t be usable anymore.