How to Replace Front Left CV Axle Assembly 2011-2020 Toyota Sienna 3.5L V6

Buy Now!
New CV Axle Assembly from 1AAuto.com https://trq.video/ia-1AACV01039

This video shows you how to install a new CV axle in your 2011-2020 Toyota Sienna 3.5L V6. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.

Estimated installation time for a professional technician is approximately: 2 hours 42 minutes

This repair was done on a 2011 Toyota Sienna Limited 3.5L Mini Passenger Van 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Toyota Sienna
2012 Toyota Sienna
2013 Toyota Sienna
2014 Toyota Sienna
2015 Toyota Sienna
2016 Toyota Sienna
2017 Toyota Sienna
2018 Toyota Sienna
2019 Toyota Sienna
2020 Toyota Sienna

Tools you will need:
• Pry Bar https://trq.video/oaeP-1AXAA00020
• 10mm Socket https://trq.video/obVx-1AXAA00017
• 12mm Socket https://trq.video/ocpi-1AXAA00015
• 17mm Socket https://trq.video/ocpi-1AXAA00015
• 21mm Socket
• 24mm Socket
• 30mm 12-Point Socket https://trq.video/oaE-1AAST00002
• Ratchet https://trq.video/oco3-1AXAA00016
• Torque Wrench https://trq.video/obqE-1AXAA00044
• Brake Parts Cleaner
• Cloth Rags https://trq.video/oUG-1AXSS00035
• Copper Anti-Seize
• Gloves https://trq.video/obxF-1AXSS00048
• Safety Glasses
• Scan Tool
• Drain Pan
• Floor Jack https://trq.video/oaJG-1AXAA00068
• Hammer
• Jack Stands https://trq.video/oav6-1AXAA00065
• Punch
• Rubber Mallet
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Toyota Sienna 2011-2020 3rd Generation:    • Toyota Sienna 2011-2020 3rd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.