Raptor Painting My Sprinter RIOT VAN With A Roller & Brush | DIY VAN PAINT JOB SERIES | Part Three

Here it is! The final result of the Raptor Painted van, all done by hand with a roller and brush, with all the final touches added back on, ready to hit the road.

In this video we finally get to peel the masking tape off the van and get Kevlar back on the road with brand new tilting solar, flat mounted starlink, recovery tracks and a fresh new look.

I do still have some bits to touch up and finish but ill get to those a later on dow the road but for now this is Kevlar's new look and its safe to say I'm happy with the end result and he's already had peoples heads turning.

If you're looking to do the same size vehicle, this is what I recommend buying...
1x 5L Black Raptor paint
2x 5L Tintable Raptor paint
1x 5L Raptor hardner
1x 1L Tint (colour of your choice)
10x Assorted paint brushes
2x Raptor roller tray kit (save these rollers for your final coat)
1x Raptor adhesion promotor
10x Textured roller heads (link below)
80-180 grit sand paper
Abrasive pads
Isopropanol Alcohol (Clean the vehicle before paint)
Mixing paint pots

I brought all of my Raptor products from Marlow paint suppliers
https://www.marlowpaintsupplies.co.uk...

Textured roller heads...
https://amzn.to/44WDyhc

Any questions leave them down below and don't forget to like and subscribe.

You can also follow us on Instagram
@livinginkevlar / ‪@sheisremote‬