GATE ASTER SE & SX - Trigger Sensitivity Adjustment

Read more: https://help.gatee.eu/space/GHC/26770...

The Trigger sensitivity option allows you not only to check the currently set sensitivity but also to adjust the sensitivity to any position of your choice without using USB-Link or Blu-link. Switching on the Trigger sensitivity mode works analogically as with other ADVANCED functions (check the Quickstart guide).After pressing the trigger to the position of the currently set sensitivity, a single, short vibration will activate. The set sensitivity is also indicated by orange LED light, which goes out when the trigger is released. The LED light informs about the set sensitivity even if all vibrations are muted in GCS.

Setting the sensitivity is done by pressing and holding the trigger to the position in which you want to set the activation threshold, and switching the selector to SEMI to confirm the set position. After this operation, you remain in the ADVANCED function and you can go to the option selection or select another function at any time. If you do not want to change the trigger sensitivity, it is enough to not move the trigger for 5 seconds - this will result in going back to the option selection.