2010-2015 Toyota Prius Oil Catch Can Install

Here's how we installed our oil catch can for the 3rd Generation Toyota Prius.

Make sure when you're looking for the brass adapter, and hoses, bring your pcv tube and occ hardware to test fit them.
- The pcv hose size is 3/8,
- The intake hose size is 3/4,
- The occ adapters were 3/8 and 1/2,
- The brass adapter that we bought threaded end was 3/4 and the barb side was 1/2.
- The amount of feet you need for both hoses is 3 feet each, then you cut it to length when you have it installed.

Tools:
http://amzn.to/2awcRDO 3/8 ratchet
or
http://amzn.to/2aDYK1X 1/4 electric ratchet
http://amzn.to/2aJy9kF 3/8 short extension set
http://amzn.to/2aYXnIy 3/8 10mm deep socket
http://amzn.to/2aZPqGv 10mm wrench
http://amzn.to/2aCThW4 3/8 12mm socket
http://amzn.to/2axt8Zh 1/4 1,3,6" extension set
http://amzn.to/2btKbQd 1/4 10mm deep socket
http://amzn.to/2aweq4t Pliers
http://amzn.to/2aEVljA diagonal cutter
http://amzn.to/2aETaN5 Hook and Pick Set (to get those plastic clips)
https://amzn.to/2LwFbt5 Hose clamp plier

Parts:
https://amzn.to/2KZ72kt Oil Catch Can
https://amzn.to/2J4Fgpo 3/8 Fuel hose (3 feet, then cut to length)
Buy Fuel hose from any auto store - 1/2 Fuel line (3 feet, then cut to length)
Buy Fuel hose from any auto store - 3/4 fuel line (2 1/4 inch in length)
1/2 in. ID x 1/2 in MIP Everbilt hose barb adapter (Home Depot)
https://www.thingiverse.com/thing:274... Oil catch can bracket

Torque specs:
21 ft. lbs - Intake Manifold bolts and nuts
7 ft. lbs - EGR pipe bolts
15 ft. lbs - Oil dipstick guide sub-assembly bolts
Hand tight

like and share this video!

If you have any questions or concerns, feel free to leave comments on our FB page.

Like us on Facebook
http://bit.ly/nutzaboutbolts1

and SUBSCRIBE!
http://bit.ly/NutzAboutBolts2