Скачать или смотреть How to Apply Printed Anti Slip Tape

Heskins Printed anti slip tape allows you to create a highly visible warning with all the anti-slip properties of our Safety Grip™ tape. Safety Grip™ is made of strong abrasive minerals applied to a self-adhesive, offering a strong non slip surface with a high Coefficient of Friction.
When applying Printed anti slip tape, we recommend cleaning the surface prior to application. Heskins H3508 IPA Cleaner is an alcohol based cleaner that will evaporate after cleaning, leaving a clean and dry surface.
Heskins recommends applying H3506 Surface Primer if the application surface is porous. This will prevent any moisture penetrating the application surface and affecting the adhesive, potentially causing it to lift.
After cleaning and priming your application area, measure out the application area and cut your material to the desired size.
Peel back a small amount of the backing liner, and begin to apply the material, pushing down with your hand as you go along, ensuring a good bond between material and surface.
Once the material is applied, remove any air bubbles with a pressure roller, which Heskins can supply for a low cost.
Heskins recommends using H3502 edge fix on the material if the tape is applied in a high traffic area. Edge fix will create a strong seal around the edges of the material, preventing edge lift.
For more information on the Safety grip range and Printed anti slip tape, please visit our website at https://www.heskins.us or call us on 877 900 8359.