Siemens NX Tutorial | Offset Curve controlled by Law Curve

B1P-39-E | Siemens NX 2007 Tutorial Modeling | Using the example of a cam plate, the principle of controlling curves via curves is shown. This sounds a bit strange at first, but in practice it helps to control curves with simple means. In this example, the distance of an offset curve is controlled via a sketch and thus also illustrates how the cam plate will later move a slider.

▬about this channel▬▬▬▬▬▬▬
With LearnNX you will learn Siemens NX step-by-step from the beginning. The basic course consists of learning videos that build on each other. (marked blue)
You start here:    • Siemens NX Tutorial | Modeling for be...  
In between you can check your knowledge with tests. (marked green)
Expert exercises impart special knowledge. (marked red)
All learning videos are available for free. We look forward to your comments on YouTube. (and about your subscription ;-)    / @learnnx  

▬about our free learning platform▬▬
😃 All tutorials, clearly arranged, can be found here: https://learnnx.com
Learning videos with a short description, together with the exercise materials as download.
You can also search 🔎 for commands or topics.
And all according to the motto: step by step / for free / for all 🎈

▬chapter▬▬▬▬▬▬▬▬▬▬▬▬
00:00:00 Content
00:00:08 Foreword
00:00:33 Create outline
00:02:04 Create law curve
00:06:06 Create offset curve
00:07:15 Extrude
00:07:43 Conclusion
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

► visit us on https://learnnx.com

#learnNX #SiemensNXfreeCourse