Refilling an AIO Liquid Cooler (Enermax LIQMAX III RGB)

Описание к видео Refilling an AIO Liquid Cooler (Enermax LIQMAX III RGB)

I mounted the AIO with the radiator on top and for a little over a year it gave no problems, unfortunately for an uppgrade I had the unfortunate idea of turning on the computer lying on its side, but temperatures skyrocketed and noises were heard of bubbling water, even by returning it to the vertical position.
Unfortunately it was no longer under warranty because it had already been replaced previously for the same defect.
Tried to top up from the cap on the radiator but felt like there was a bubble stuck in the pump.
I had to disassemble the pump, in order to insert the new liquid from two points, a task not facilitated by the presence of two anti-tampering screws.
Be careful not to drill the screws completely, otherwise you will damage the pump, just create two small steps to extract them.

WARNING:
This video is only for entertainment purposes. Do not try this at home. If you rely on the information portrayed in this video, you assume the responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.

Комментарии

Информация по комментариям в разработке