Скачать или смотреть Masonry Block Fill, Core Fill, Mortar Pumping, Grout Pumping, AIRPLACO PumpMaster

The Airplaco PumpMasterTM PG-25 grout pump is shown on a condo development jobsite where it is used to pump mortar to the scaffolds for laying block and to pump mortar for filling cells in the block walls. On this particular job, the contractor used two pumps working in tandem to deliver mortar to the elevation and distance needed. One pump on the ground is filled with mortar batched on site. This material is pumped to a second floor into a second pump. This pump delivers the mortar over the majority of the distance to the top floor and several feet across to fill cells in the cmu (concrete masonry units) aka blocks!

https://gunitesupply.com/product-cate...

The PumpMaster fills block without the need of a forklift or full-size concrete pump. The Airplaco PG-25 provides an option for block fill contractors. It saves a lot of labor and equipment that is needed in traditional methods of filling block, says Tom Norman, Airplaco Product Manager.
•50 ft vertical pumping
•200 ft horizontal pumping
•max aggregate size is 3/8 inch minus
•Output is 6 cu yd /hr
•5 inch hard-chrome material cylinder
•3 inch ball check manifold
•3 inch grooved outlet
•5 cu ft hopper
•25 hp gas engine (key start)
•hydraulic drive train
•Pea-Rock Discharge
•Wireless remote optional
•Auxiliary hydraulics optional

Performance will vary depending on power unit, hydraulic pressure, cycle rate, mix design and placement line. Consult Airplaco for appropriate mix designs.
Masonry Block Fill Grout Pump
Model PG-25 is the ideal machine for block fill and pea rock applications, pressure grouting, void filling and pea-gravel pumping. Other applications include Masonry Block Fill, Masonry Wall Construction, Pea Gravel Pumping, Insulated Concrete Foam (ICF), Sidewalk/Patio Slab Pumping, Slabjacking / Mudjacking, Void Filling and Pressure Grouting. The PumpMaster is field-tested and approved by hundreds of contractors. Each pump is manufactured from over 60 years of manufacturing and on-the-job experience. Other applications for the PG-25 grout pump include mudjacking, slabjacking, concrete raising, concrete leveling and concrete lifting.

Airplaco Equipment Company has three US locations to offer convenient customer service, instruction, and tech support to customers. Three locations also allow Airplaco to offer strategic distribution to any part of the country. Select International distributors are also available for other customers in more remote locations. Thanks for reading about the Airplaco PumpMaster slabjack/mudjack grout pumps. Call us today for your quote:

Visit: http://www.airplaco.com
https://gunitesupply.com/contact-us/

THIS VIDEO IS INTENDED FOR EQUIPMENT DEMONSTRATION PURPOSES ONLY. AIRPLACO EQUIPMENT AND GUNITE SUPPLY, DIVISIONS OF MESA INDUSTRIES, MAKES NO ENDORSEMENT OR GUARANTEE THAT THE TECHNIQUES DISPLAYED IN THIS VIDEO ARE APPROPRIATE OR PROPER PROCEDURE. THE OPINIONS AND TERMINOLOGY EXPRESSED IN THE VIDEO DO NOT NECESSARILY REFLECT THE VIEWS AND OPINIONS OF AIRPLACO EQUIPMENT CO. OR GUNITE SUPPLY.