How to wire a 7.5hp 220V Single Phase Air Compressor (Eaton Polar Air)

In this video: DIY wiring of the Eaton 80gal 7.5hp air compressor from start to finish. I'll also show how long the 80 gallon tank takes to fill up from empty.

🔥 Watch This Next:    • How to wire & install an hour meter f...  

=============================================================
6/3 SOOW Cable - https://www.windynation.com/products/...

Eaton Polar Air 7.5hp 220V Single Phase User Manual - https://www.manualslib.com/manual/267...

90 degree 3/4 connectors - https://www.homedepot.com/pep/Halex-3...


❓Any questions? Drop them in the comments!

🎯 If you enjoy the channel content, please consider subscribing. Be sure to like my videos and click the notification button to be alerted when new content is added. It's always good to hear from other builders, so feel free to drop a comment!

=============================================================

⏰ Time Codes ⏰
00:00 Intro
00:43 Wire selection
01:46 90 Degree knockout connectors
02:45 Crimping on wire ferrules
03:42 Wiring the magnetic starter
08:10 Oops, had to remove ferrules from one end
10:07 Recap
11:52 Built in thermal overload & reset button
13:23 Will the compressor turn on?
13:45 80gal tank fill time
14:06 Outro


=============================================================

I've been documenting numerous builds for several years, so if there's anything specific you might be looking for, please comment and I'll be sure to check my archives for footage.

Keep checking back for new videos that document my ground up build of the "CoronaFlu Malibu" 1967 Chevelle.

-StreetClassicFabLab