How To Install Polaris Ranger 1000 Clutch Kit Gilomen Innovations

This video shows how to install a clutch kit into a 2018+ Polaris Ranger XP 1000.
Also shows how to check and correct clutch alignment.

0:00 Introduction
0:10 Remove air box lid. This provides extra clearance to remove clutch housing cover.
0:34 Remove screws from clutch housing cover and remove cover.
1:10 Use your factory belt removal tool to remove the belt
1:45 Remove the 10mm head bolts from primary clutch
2:13 Remove clutch weights
2:32 Install new clutch weights
3:46 Install belt.
5:02 If alignment is bad. Remove secondary bolt
5:15 If your belt is tight against outer primary sheave then you need to add shims
5:25 If your belt is tight against inner primary sheave then you need to remove shims from the factory stack