Linear Actuator - Agri-Fab Tow Behind Spreader

Detailed video of adding a linear actuator to an Agri-Fab tow behind spreader.

4" 12v linear actuator connected to a 130lb tow-behind Agri-Fab spreader being pulled by a John Deere 1025R. No modifications necessary to the spreader. Uses existing bolt location on tow bar. Minimal fabrication of small clamp/bracket to attach to the gate rod. Controlled by wireless remote with controller box.

Link to Actuator Used:
https://www.amazon.com/gp/product/B00...

Link to Magnetic Reed Switch Used:
https://www.amazon.com/Magnetic-Switc...

Link to Motor Controller Used:
https://www.amazon.com/ECO-WORTHY-Wir...

Wiring Diagram: https://drive.google.com/file/d/1ZPIr...

Here are some photos showing how to attach rod and bracket using supplied actuator brackets. Just need to use small wire rope clamps down thru the actuator to clamp around the rod.

Photo 1: https://drive.google.com/file/d/1jW5s...
Photo 2: https://drive.google.com/file/d/1zjZP...
Photo 3: https://drive.google.com/file/d/1awRi...

Front Bracket Attachment (hitch side). Use an oversize nut as a spacer to get actuator to proper height.
Photo 4: https://drive.google.com/file/d/1mPB3...