BMW R1250 GS Adventure (2021) 1st service, part 1

Prefer to do all my own servicing work and as this bike is under a 3 year warranty I want to ensure I have a proper record of work completed, as proof should an issue arise. The costs saved will be used to purchase the GS911 wi-fi Hex code reader, more of that later.

AS ALL COUNTRY'S HAVE THEIR OWN RULES, I CANNOT GIVE ADVISE ON WARRANTY WORK IF YOU SERVICE YOUR OWN BIKE. TORQUE SETTINGS ARE AS PER FACTORY. SUMP WOULD BE DRY, NO OIL, SO BEWARE ONCE OIL IS ON THE THREADS. AIR ON THE SIDE OF CAUTION.

As with all video's this is just a guide and if you intend to do your own work, you are responsible!


Thanks to https://www.nippynormans.com/


Torque settings


REAR END
Rear swing arm rod bolt (for drive splines) T5056nm

Bottom bung 20nm T45
75/90w 180ml 20nm 6mm Allen
ABS sensor T30 5nm
Brake caliper T40 24nm
Rear wheel 60nm
Rear.mudguard
Silicon grease for boot
Clean disk with brake cleaner

OIL CHANGE

Bash plate 5 t30 torx
Drain plug 10mm Allen 20nm
Fill half way up sight glass, start to fill filter and recheck