IC 9700 using SatPC32 and WSJT X

Please read below for the updated instructions since posting this video.

How to configure the Icom IC-9700 to work with both SatPC32 and WSJT-X at the same time. This allows you to make contacts on satellites using FT4.

The switch I used after wsjtx.exe is --rig-name=None

Update 1: audio settings video for S.A.T. users.
   • FT4 on amateur radio satellites with ...  
http://www.igatemini.com/sat - link to purchase.

Update 2: You will want to change in the SatPC32 CAT menu the speed to at least x5 and maybe even x10. Make sure both the SSB/CW and FM/PKT intervals are 0. Click store under each of those options to save.

!!!!!UPDATE 3 !!!!! Suggested frequencies.

On RS-44 145.990 seems to be where the crowd has landed.

From ANS-234 AMSAT News Service Weekly Bulletins 2021-08-21
FT4 activity is generally at the low end of the downlink passband on other linear satellites (5 kHz above the bottom passband limit), activity on AO-109 has been on a downlink frequency of 435.770 (5 kHz below transponder center)

Special thanks to Bob N7ZO and Steve KC1MMC.

Hope to catch you on the birds!

73
-Ant NU1U