Basic Beginners FreeCAD v1 / 0.22 | Lesson 7 | Part Design Basic Exercise 1 | Drilled shim

Following on from the theory lesson we will tackle our first exercise, a drilled shim. We will be creating the object from a technical drawing.

This is for FreeCAD version 1 also known as 0.22, 1.0 CR.

Public playlist :    • Basic Beginners FreeCAD 0.22 (Public)  
NOTE: If your a patreon then you will have access to the early access private playlist.

We will learn
Setting up the panels and toolbars in the part design.
Introducing the part design workbench
What is a body
Using the task pane to guide us through the process.
What is the origin object in the treeview inside the body.
Setting our body as active.
Introducing the sketcher.
Creating our first sketch and attaching to a plane
Setting our scale.
Apply a constraints, dimensioning and aligning.
Auto constraints and auto remove redundant constraints.
Creating a rectangle.
What is a profile.
Wire not close and how to fix.
Validating a sketch
Understanding degrees of freedom (DofF), under constrained and fully constrained.
Making apply constraints quicker.
Applying the pad operation.
Editing sketches
Making a full drilled shim in FreeCAD

Public playlist :    • Basic Beginners FreeCAD 0.22 (Private)  
NOTE: If your a patreon then you will have access to the early access private playlist.

Technical drawings are available from a public patreon post
  / basic-beginners-107667507  

#FreeCAD , #CAD , #3DPrinting
Journey with me and

Patreon
  / mangojellysolutions  

Donate:
https://ko-fi.com/mang0

https://www.paypal.com/paypalme/darre...

Subscribe:
   / @mangojellysolutions  

Browse my Redbubble Shop:
http://MangojellyLabs.redbubble.com

Blog:
https://mangojellysolutions.blogspot....