AEG ÖKO_LAVAMAT 41000 top load washer - Drum clean 95C° (gone wrong & faulty)

Hello!

Here is a drum clean on the old AEG ÖKO&LAVAMAT I got off the scrap yard.

On program 2, 90C° main wash with 300rpm final spin.

Unfortunately, 3 things went wrong..

The machine, after the main wash was done the timer turned itself to program 5 and a half and stopped there, NO RINSES OR FINAL SPIN.
So I set it my self to synthetics final rinse once that happened as the cotton section on the timer is unfortunately very bad.

Second problem is, when the machine ended there was so much suds inside even though I used a normal amount of chlorine! The sink drain hose started overflowing! (13:37) I guess residue soap from the previous owners? And lastly the water cable leaks a little bit, ill probably replace it.

The drum bearings are bad and the motor sounds very bad, it's carbon brushes are almost worn to nothing to the point that the commutator has gotten extremely black. Idk if the motor bearings are also on their way out because it's way too loud, it's probably both.

Enjoy!

PARTS OF CYCLES:

0:00 Starting

3:25 Main wash with jet system

5:51 Drain & this is where the timer goes wrong!

7:07 Final rinse

10:42 Final spin

17:06 End & too much suds left