Скачать или смотреть Using an Arduino to Control Your TV with an IR Sender Module

Disclaimer/Disclosure: Some of the content was synthetically produced using various Generative AI (artificial intelligence) tools; so, there may be inaccuracies or misleading information present in the video. Please consider this before relying on the content to make any decisions or take any actions etc. If you still have any concerns, please feel free to write them in a comment. Thank you.
---

Summary: Learn how to use Arduino, an IR sender module, and some simple code to control your TV.
---

Using an Arduino to Control Your TV with an IR Sender Module

Have you ever wanted to use your Arduino to control your TV or any other infrared (IR) controlled device? With an IR sender module and a bit of programming, you can transform your Arduino Uno into a universal remote control. This post will guide you through the process, step-by-step.

What You Need

To get started, you’ll need the following components:

Arduino Uno (or any other compatible Arduino board)

IR sender module

IR receiver module (optional, for learning commands)

Jumper wires

Breadboard (optional but useful for prototyping)

Setting Up the Hardware

The Circuit

Connect the IR sender module: The IR sender module typically has three pins: VCC, GND, and Signal.

VCC to the 5V pin on the Arduino.

GND to the GND pin on the Arduino.

Signal to pin 3 on the Arduino (or any other digital pin).

Optional: Connect the IR receiver module: This is used for capturing existing remote control signals.

VCC to the 5V pin on the Arduino.

GND to the GND pin on the Arduino.

Signal to pin 11 on the Arduino (or any other digital pin).

Programming the Arduino

Installing the IRremote Library

First, you need to install the IRremote library in the Arduino IDE:

Open the Arduino IDE.

Go to Sketch > Include Library > Manage Libraries.

Search for IRremote and install the latest version.

Capturing IR Codes

If you don't already know the codes for your TV, you'll need to capture them using the IR receiver module:

[[See Video to Reveal this Text or Code Snippet]]

Upload this code to your Arduino, open the Serial Monitor, and point your TV remote at the IR receiver. Press the buttons you want to learn, and note the codes that appear.

Sending IR Codes

Once you have the codes, you can send them using the IR sender module:

[[See Video to Reveal this Text or Code Snippet]]

Upload this code to your Arduino. To send a code, open the Serial Monitor, type the hexadecimal code you learned previously without the 0x prefix, and press enter. Your Arduino should now send the IR signal to your TV.

Conclusion

Using an Arduino to control your TV with an IR sender module is a fun and educational project. With a few components and some simple code, you can create a versatile remote control for all your infrared devices. This project opens up many possibilities for home automation and learning about communication protocols.

Happy coding!