CNC plotter drawing MADE EASIER (with CUP OF JOE and DESSERT)

This video uses a CNC router plotter tool from my video -- TRANSFORM YOUR CNC INTO A PLOTTER IN LESS THAN 2 HOURS USING OPENSCAD AND A 3D PRINTER to demonstrate a NEW, far superior method for securing the media--poster board in this instance--to your CNC bed (as compared to the painter's tape that I have utilized on my channel in the past). Specifically, this video gives practical, easy to implement tips on how to best utilize neodymium magnets to make your future CNC plotting/drawing MUCH EASIER, QUICKER, WITH LESS LONG TERM EXPENSE, ALL AT THE SAME TIME REDUCING WASTE. I HIGHLY recommend you give this method a try. It is low cost and QUICK! You won't want to go back to painters' tape when securing a poster board to your CNC bed.

Side Note: This method is fully compatible with the use of the wooden DIY drawing CNC tool that I have shown how to make previously on my channel.

SOME SAFETY REMINDERS:
1) Always wear safety glasses when using your CNC (even with a pen tool)
2) Follow all your CNC's safety guidelines
3) Keep neodymium magnets away from kids and pets
4) Pause CNC job before adding or removing neodymium magnets from bed
4) NEVER turn on router/spindle when using Pen/Plotter tool
5) ALWAYS remove all magnets from CNC bed BEFORE using your router/spindle
6) Any additional screws you may have added into your spoil board, remove before using router bits
7) As with any CNC work, severe injury is possible. Exercise all safety guidelines and use protocols that you would regularly employ when working with your particular CNC.