Connecting Key Voltmeter to Fiido D2S

A tutorial on how to connect a key voltmeter to your Fiido D2S.

WARNING:
Before attempting this, make sure that your bike is disconnected from your battery.

Properly insulate ALL CONNECTIONS before reconnecting your battery and turning on your bike

DISCLAIMER:
Attempt at your own risk. I will not be held responsible for any damages and injuries you may incur doing this mod.

PROCEDURE:
1. Trace the G20 wire leading to the controller
2. Cut the G20 red and black wires ONLY
3. Connect the black wire from the voltmeter to the black wire of the G20 switch
4. Connect the red wire of the voltmeter to the red wire of the G20 switch
5. Connect the green wire of the voltmeter to the red wire going to the controller.
6. Ensure that all connections are insulated