How to Replace Passenger and Drivers Side Blend Door Actuators 2007-2013 Chevrolet Silverado

Buy Now!
New HVAC Blend Door Actuator from 1AAuto.com https://trq.video/ib-DMBMX00001

This video shows you how to install a new blend door actuator on your 2007-2013 Chevrolet Silverado. If the air temperature does not seem to respond at all to changes you make in the heat or AC settings, the blend door may not be opening or closing properly due to a faulty actuator.

This repair was done on a 2009 Chevrolet Silverado 1500 LTZ 5.3L Extended Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500

Tools you will need:
• 10mm Socket https://trq.video/oaI3-1AXAA00017
• 5.5mm socket
• 7mm Socket https://trq.video/oaI3-1AXAA00017
• Trim Tool Set https://trq.video/oS5-1AXXX00006
• Socket Extensions https://trq.video/oaY3-1AXAA00015
• Magnet - Extendable

Subscribe:    / @trq  

Check out our playlist:
Chevy Silverado 2nd Generation 2007-2014:    • Chevy Silverado 2nd Generation 2007-2014  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.