DIY POWERFUL TESLA COIL WITH ONLY 4 COMPONENTS

Hello guys, Today I have made this small but powerful tesla coil with only 4 components. I have used a IRF640 mosfet which can easily drive the tesla coil. The secondary is wound on a PVC pipe with a diameter of 40MM and I have used 0.25MM wire for the winding. The total number of turns can be above 200 turns. The primary consist of only one turn of a 1MM copper wire. The input voltage of this tesla coil Is between 12v to 24v. The mosfet gets very hot after 1 minute so use a large heatsink. Please be careful with this circuit because this circuit consist of high voltage !.

THANKS FOR WATCHING 


COMPONENTS LIST

1 X IRF640 MOSFET
1 X 47R RESISTOR
1 X 1K VARIABLE RESISTOR
1 X 2.2UF TO 5UF MKP CAPACITOR





SCHEMATIC


https://drive.google.com/file/d/1mdwB...