This Device KEEPS 99% OF DEBRIS Out Of Your Shop Vac!! (Dust Stopper/Dust Deputy/Dust Collector)

Check Out Our FREE GUIDE: 25 Must-Have Carpentry Tools...Under $25 Each!
https://www.thehonestcarpenter.com/

AFFILIATE TOOL LINKS:
Delmar Shop Vac Dust Separator:
https://amzn.to/3lJYXbm
Dust Deputy Anti-Static Cyclone:
https://amzn.to/3qElgxa
Dust Deputy Deluxe--5 Gallon Kit:
https://amzn.to/3jCH8HN
Ridgid 12-Gal Shop Vac:
https://amzn.to/3xg5uuY
Ridgid High-Efficiency Filter Bag (Not HEPA!):
https://amzn.to/3AlzHum
Ridgid HEPA Replacement Cartridge Filter:
https://amzn.to/3xaofQl

(These are affiliate links. When you shop through these links, we receive a small commission at NO EXTRA CHARGE TO YOU. We greatly appreciate the support!)

NON-AFFILIATE LINKS:
Offical Dust Stopper:
https://www.homedepot.com/p/Dustopper...

FOLLOW US ON INSTAGRAM:
  / thehonestcarpenter  
FOLLOW US ON LINKEDIN:
  / thehonestcarpenter  

CHECK OUT OUR OTHER TOOL-RELATED VIDEOS:
Shop Vac Filter Bags:
   • Never Use A SHOP VAC Without One Of T...  
This Tool Makes Nail-Prying Easy:
   • This Tool Makes PRYING UP NAILS Easy!...  

This Device KEEPS 99% OF DEBRIS Out Of Your Shop Vac!! (Dust Stopper/Dust Deputy/Dust Collector)

Shop vacs and filter bags fill up quick with both large and small debris. This leads to tedious filter cleaning, or expensive filter replacement. This short video from The Honest Carpenter will show you a great tool that solves this problem!

CYCLONIC or CYCLONE DUST SEPARATORS are simple devices that plug into the suction pipeline of your shop vac or dust collector to separate and catch larger debris before it reaches the dust collector.

DUST STOPPER and DUST DEPUTY are two of the most common cyclone separators on the market. (This video features THE DUST STOPPER.)

Most cyclone separators attach to a 5-gallon bucket, or possibly a large trash can or collection bag.

When a shop vac or dust collector is turned on, suction draws dust and debris through a hose, into an inlet port on the cyclone dust separator. Here, spinning force separates large debris from very small particles.

Heavier, larger dust and debris are flung towards the outer wall of the cyclone, where they are channeled, or allowed to fall, into a collection basin. Lighter, much smaller particles stay near the center of the cyclone, due to their inertia, where they are sucked up through an outlet port.

Typically, only particles that are less than 10 microns in size will pass onto the dust collector filters.

Up to +99% of particles are caught by the cyclone separator!

This DRASTICALLY reduces dust collector filter maintenance. Anywhere from 5x to 100x less maintenance is required.

Thanks for watching! Be sure to visit us at The Honest Carpenter Website:
www.thehonestcarpenter.com