How to Replace Fan Control Switch 1997-2006 Jeep Wrangler

Buy Now!
New Heater Fan Control Switch from 1AAuto.com http://1aau.to/ia/1AHCX00283

This video shows you how to install a new fan control switch on your 1997-2006 Jeep Wrangler. The fan control switch is the part responsible for changing the speed of the air conditioning and heat blower. A failed resistor will usually result in blowers only going one speed, or not at all.

This process should be similar on the following vehicles:
1997 Jeep Wrangler
1998 Jeep Wrangler
1999 Jeep Wrangler
2000 Jeep Wrangler
2001 Jeep Wrangler
2002 Jeep Wrangler
2003 Jeep Wrangler
2004 Jeep Wrangler
2005 Jeep Wrangler
2006 Jeep Wrangler

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obth/1AXAA00013
• Phillips Head Screwdriver http://1aau.to/obth/1AXAA00013
• Trim Tool Set http://1aau.to/oai7/1AXXX00006
• 1/4 Inch Socket http://1aau.to/ocf/1AXAA00018
• Ratchet http://1aau.to/obLM/1AXAA00016
• Gloves http://1aau.to/oate/1AXSS00048
• Safety Glasses

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.