etrailer | Valterra Dual RV Water Inlets: The Breakdown

Click for more info and reviews of this Valterra RV Water Inlets:
https://www.etrailer.com/RV-Water-Inl...
Check out some similar RV Water Inlets options:
https://www.etrailer.com/dept-pg-RV_W...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-Valt...
Today, we're going to take a look at the Valterra Gravity Fill City Water Inlet for RVs. This is white in color. This part will have the two water connections right here, and it does conform with Federal and State laws for drinking water fixtures. Right here on the back, you'll see it has a 1/2 inch male pipe thread connection which includes a check valve on the inside. On the outer portion, you can see it has this nice press and dust plug to keep any grind from getting on the inside. If you notice it has this garden hose swivel fitting with a gripper to help tighten it on. The other one, if you notice on the back, it is a 1 1/4 inch barb connection.

It has the bayonet style cap which means you just twist a quarter of a turn and it unlocks it. Put it back in, you just again twist it to put it into place. If you notice the bayonet cap has a tether attached to it, which is attached to the frame here. Keeps you from misplacing the cap. Gives you a nice, quick, reliable seal. Also on this connection, if you want you can rotate and pull out the whole barb connection.

Then to put it back in, just line it up, and the same way, just twist it into place. This part is a UV stabilized plastic. Also, if you notice the very top right up here, and in the back, you'll see it has a 1/2 inch air vent for a fast fill. Again, the color on this is white. It does come with everything shown here.

It comes with the inlet itself. It comes with the installation screws, the installation putty tape, and pipe thread tape. The last thing I just want to give you some overall dimensions on this. The overall width edge to edge, is right at 7 1/2 inches. The height top to bottom is right at 5 1/4 inches. That should do it for the review on the Valterra Gravity Fill City Water Inlet for RVs, white in color..