Working Ed Gray Motor

EV Gray Capacitive Discharge Engine. Build 6.0 4/19/2015. Replaced gas combustion with EMP. This is a dead project to me, because I had to supply [email protected] to 1200 Watts to keep the 450uf Cap charged. The Husqvarna 60 chainsaw crankshaft and piston was not ideal nor resistance free --it has rubber seals suppressing compression blow back, which I did not remove, a flywheel with more mass, hence resistance... it could of worked much better.

Note 1 -don't believe the equations of iron core vs air core. The strength of the pulse relates to the proximity to the heart of the torus (where the electrons flip their spin "Bloch Wall" ) - Why the solenoid core(iron vs air) based equations, though correct outside the dipole, is freaking wrong by orders of magnitude inside a coil (During DC Pulse). This was probably the technology of the Tesla particle ray, using small particles accelerated with a cascade of these discharges timed a fraction after the block wall.

Note 2 - Don't build this motor or anything for that matter ---cause, I know what kind of folks are out there and you will croak from the HV.

Note 3 - There are many improvements I could do... but in the end it wont power your house (from what I know now, this was built with no resonance considerations)

Note 4 - Why this is the wrong path for anything usable: Quote from Adam Trombly which is my mantra: "All we have to do: Is in a resonant domain, introduce an heterodyning wave or standing wave, properly and it increases the effective field density in a given electromagnet circuit. It increases the density of that field by orders of magnitude." Harness the field density gain... and your dancin' (my new direction). This circuit, as in EV Gray...IMHO, falls short of doing that (it discharges the accelerated electrons in heat when the power used is at high enough levels to move motor parts). I think he(EVG) abandoned the CET and made a basically a pre Bedini 2nd battery charger because it could never gain the torque to do work. I know people aren't gonna want to hear that, but I get to say it because I tried to build it, and I am not perpetuation crap that doesn't help anything but make an ugly noise maker. I do think now that my approach is different, making a motor is secondary.

7-18-23 Update: This video is halfway there, I know how to use cold electricity now, and with it, you can multiply the magnetic pulse maybe even by a order of magnitude.