FREE Mod | Make Your Factory Bumper Look Better + Make Covers to Protect Electricals | Jeep Wrangler

Thanks for checking out my sixth mod to my Jeep! Next on my list was to
mod the front factory bumper. We were originally planning on doing this solely for aesthetic reasons, but after installing the lift kit + wheel/tire package, we realized this mod was necessary from a functionality standpoint.

Please excuse the somewhat shaky footage during the removing the bumper section. We did this mod on the fly after we finished adding the lift and realized we couldn't pull it out of the garage without removing the air deflectors. So, with very little camera battery, and getting later into the night, we did this mod on a whim! The rest of the video resumes to proper quality once we had time to prepare 😉
The good news is you can do this mod for FREE. Whether you're running big tires or just want a more aggressive look, this mod is one you'll want to add to your list.

We took this mod to the next level by repurposing the plastic from the air deflectors and using it to create bumper covers to protect the electricals on the inside of the bumper. This gives it a clean look, and you get peace of mind knowing your Jeep is protected from the elements.

Stay tuned for upcoming mods and tutorial videos including how to recalibrate your speedometer, customizing the KMC Rockstar III Wheels, adding a new grille, and some preventative maintenance.

If you have any questions about this mod, drop a comment below and we'll do our best to help you out!