How To Replace Front Wheel Bearing on Honda Fit 1st Gen Jazz

PARTS:
Wheel bearing OEM: https://www.hondapartsnow.com/genuine...
Front hub OEM: https://www.hondapartsnow.com/genuine...
CHEAP Bearing + Hub set x 2: https://ebay.us/XRahYe (As an eBay Partner, I may be compensated if you make a purchase)
ABS sensor Driver Side https://amzn.to/3QGCs3E
ABS sensor Passenger Side https://amzn.to/47zdrxh
Beck Arnley 103-0504 axle nut: https://amzn.to/3CKhZnn

TOOLS:
Impact Driver https://amzn.to/45WMaTV (or drill)
small chisel
big hammer
needle nose pliers
slide hammer + 4x100mm adapter https://amzn.to/45WcmOO
FWD Bearing Puller Installer Kit (only works if you can pull the hub out with slide hammer) https://amzn.to/3QFiGFV
large snap ring pliers https://amzn.to/3FIwBVi
32mm axle nut socket https://amzn.to/46WC1If
3/8” ratchet
10mm socket
12mm socket
1/2” breaker bar
17mm socket
19mm socket
12mm wrench
19mm wrench
1 7/16 socket to press bearing
freezer
bucket
brake cleaner
anti-seize grease https://amzn.to/3Sq7gXQ

OPTIONAL:
Impact wrench (save a lot of time)
Dremel (to cut bearing race, if not replacing hubs)

IF YOUR FIT IS AS RUSTY AS MINE:
PB Blaster
12 ton press https://amzn.to/3Mr3eul
17mm universal socket (for lower ball joint nut) https://amzn.to/3SoUQzi
Drill (for broken ABS sensor)
24mm socket (to press hub from bearing) https://amzn.to/3sgKas6
punch (to tap snap ring)
Propane Torch

More Honda Fit How-to Videos:
How to Install Rear Wheel Bearing:    • How to: Fix/Replace Rear Wheel Bearin...  
How to Fix Rear Hatch Door Handle + Latch   • How to Fix/Repair Rear Hatch Door Han...  
How to Install Coilover Suspension:    • How to Install MaxpeedingRods Coilove...  

I don't have Patreon or ask for donations, but you can support the channel with some rad gear from my store: http://6thgeargarage.com/merchandise/

Instagram: 6th_gear
facebook.com/6thGearGarage