Honda CRV Easy Alternator Replacement

Feeling generous? https://buymeacoffee.com/andrewhkim ☕️☕️☕️

Time to replace the alternator on a high-mileage Honda CRV. No need for bleeding any coolant lines. Just simple removal of nuts/bolts, and loosening of the belt tensioner.

This is specifically working on the CR-V Gen 2 (2002-2006) model year, though you may see some similarities in other models using the 2.4L K24 engine, such as the Civic, Accord, Odyssey, Element, Acura TSX, etc.

Timestamps
0:00 Intro
1:02 Remove Serpentine Belt, P/S Pump
3:02 Remove Throttle Body, Intake Manifold, T-Bar
3:32 Intake Elbow
3:56 Throttle Body
4:22 Hood Latch
5:20 Intake Manifold
5:46 Unhinge T-Bar
6:15 Remove Old Alternator
7:38 Remove Expansion Tank
9:00 Comparing Old vs New
9:50 Install New Alternator
11:32 Double-check Serpentine Belt
11:57 Reinstall Expansion Tank
12:29 Reinstall Intake Manifold
14:02 Reinstall Throttle Body
14:33 Reinstall P/S Pump, Serpentine Belt
15:27 Reinstall T-Bar, Hood Latch
16:13 Reinstall Intake Elbow, Engine Cover, Battery
17:03 Realign Hood Latch
17:14 SEND IT!

Product Links:
VGO Gloves - https://amzn.to/34bQnWf
Denso Alternator 210-4168 - https://amzn.to/30lThql
14mm Offset Wrench - https://amzn.to/2Sb4vcr
Gates Serpentine Belt - https://amzn.to/3cMDyoV
ACDelco 38278 Belt Tensioner - https://amzn.to/2HKuANL
P/S Pump Pressure Hose - https://amzn.to/3iiEBOw

DISCLAIMER:
Amazon Affiliate links above. Same cost to you...I may just earn a small commission. As an Amazon Associate, I earn from qualifying purchases.

----------------------

SOCIAL:
http://andrewhkim.com
  / andrewhkim  
   / andrewhkim