How to fix the screeching, squealing noise coming from your tumble dryer (Hotpoint, Indesit, Creda)

My Hotpoint tumble dryer, some 10 years old, developed a horrible screeching noise several months ago. If you have an ounce of common sense, handy with a screwdriver etc, then this is an easy fix (so long as the bearing drum shaft is in good condition). Always seek professional advice if unsure!

Basically, the rear shaft that supports the drum weight , over the years, wears down the bearing/support that it rests on, due to gravity, eventually causing the screeching noise.

Takes about 30 minutes
Cost of bearing plate is approximately £10.99

Bearing plate for my Hotpoint was purchased from
https://www.espares.co.uk

If you’ve got the same drier as mine
Stock Number is: ES865498

Save some money on a call-out , which in the UK can cost between £45-100( says google!)


NB
If the drum shaft has been worn and damaged you made need a new shaft kit, in my case the shaft was OK.