How to set up and use your Kokido Telsa EV90 Rechargeable pool vacuum

Getting started: How to set up, use, recharge and clean your new Kokido Telsa EV90 rechargeable pool vacuum.

The colorway of your particular cleaner may vary from the one shown in the video, but the process for using it will be the same. The parts included with your Telsa EV90 cleaner will vary depending on the model you own.

1. Attach the handle and side extensions*. (Handle is permanently installed once assembled)
2. Attach the filter bag. Make sure you have secured the bag.
3. Plug in charger adaptor to the electricity socket.
4. Connect the charger base to the product, the charger on the adaptor light will turn red.
5. Fully charge the cleaner prior to first use (5-6 hours).
6. Remove the charger from the cleaner when it shows green light.
7. Connect to a standard telescopic pole (not included).
8. Switch on the cleaner by turning the magnetic switch.
9. Cleaner with water sensor activates the motor only when it is submerged in water. LED indicators will show blue when it is ready to use. LED changes to green once submerged in water and starts working.
10. Switch to fine filter bag for sand and fine sediments.
11. After cleaning your pool, empty and clean the filter bag.
12. Simply clean the filter bag with garden hose jet sprayer or from water tap.
13. To recharge, make sure the charging port on the cleaner is dry and recharge it for your next use.

TIPS: Remove side extensions for cleaning narrow areas.

IMPORTANT: Charging base is not waterproof, do not put it in water.
Make sure filter bag is installed before using the cleaner.