Assembly of 3D Printed Prosthetic Hand | From Thingiverse

The original files and designs are at http://www.thingiverse.com/thing:1691704
This is a project I have been working on for around a year and a half now, and this is close to the final product. However, before it is completely done I will need to touch up on the code and find an amputee to test it out. The overall price is a little under $100 for shipping to the US, it uses 2 servos (1 for the thumb and 1 for the other 4 fingers) and is controlled by a Myoware muscle sensor. I used some more powerful servos for added strength, but standard servos can also be used. The materials are:

Servo
http://www.banggood.com/JX-PDI-6221MG...


Battery
https://www.pololu.com/product/2224

Flexible Nylon Paracord to pull finger back
http://www.paracordplanet.com/black-1...


Arduino Nano
http://www.banggood.com/NANO-IO-Shiel...


Rubber Sheet
http://www.ebay.com/itm/NEOPRENE-RUBB...


Fishing wire anywhere

I strongly support any improvements or modifications to the arm, if you have any I would love to check it out! You can E-mail me at [email protected] also if you have any questions you can ask me.