RhinoShield Mod Case Installation & Removal Tutorial

Check out our new Mod Case: http://bit.ly/2yBtYDq

Bumper Mode Installation Guide:

Method 1:

0:18 Align the RhinoShield logos on the sides to securely merge the Rim and the Frame together. Make sure the Rim’s ridge is secured in place.

0:26 Install your phone into the bumper from the top first, snap each corner in place, make sure the Rim is secured in place.

Method 2:

0:38 Insert the phone into the Frame, corner first. Make sure the phone is secured in place.

0:47 Align the Rim's RhinoShield logo to the Frame’s RhinoShield logo. Make sure the Rim’s ridge lining is secured in place.

Bumper Mode - Removal Guide:

1:00 Remove the Rim from the Frame by gently separating the two from the corner first and work your way around the phone.

1:05 Separate the Frame from the phone by pushing the phone inwards.

Back Case Mode Installation Guide:

Method 1:

1:14 Insert the BackPlate into the Frame by aligning the RhinoShield logos and make sure the ridges are secured in place.

1:23 Starting from the corners, insert your phone into the case. Make sure all corners and the BackPlate are secured.

Method 2:

1:33 Insert the phone into the Frame from the corner first. Make sure the phone is secured into place.

1:38 Align the BackPlate's RhinoShield logo to the Frame’s RhinoShield logo. Make sure the BackPlate’s ridge is aligned and secured into place.

Back Case Mode Removal Guide:

1:50 Starting from the volume buttons’ side, gently pull apart the Frame from the phone then gently remove the BackPlate from the Frame.

1:56 Push the phone inwards toward your body from one corner to separate the phone from the Frame.

If you have any question or issue, be sure to contact us at:
[email protected]